EXM ENCLOSURES NEMA 4X

Please select a sub-category below:

Need EXM Enclosures NEMA 4X for Your Harsh Industrial Setting?

Industrial Control Direct gets its EXM Enclosures NEMA 4X from one of the world’s best manufacturers of industrial enclosures. Intended for outdoor and indoor use, the NEMA 4X Enclosures are specifically constructed to provide a degree of protection against splashing, hose directed water, rain, snow, and windblown dust. They are resistant to corrosion. And, these enclosures will remain undamaged when ice forms on the outside of them.

For protection against dirt, oil, or dust splashing, our NEMA 4X Enclosures are the way to go. They work indoors and out in areas where they may be subject to water coming from any direction, like from a hose. They also work well in areas where corrosion is a common problem. The enclosures feature corner seams that are continuously welded, and the actually boxes are made from stainless steel of 16 GA or 14 GA quality.

How Are They Designed to Stand up against the Elements?

To increase the rigidity of the opening and to prevent dripping water from enter when the door is open, there is a curled lip around all sides of the opening. To ensure a heavy duty and complete water tight seal, each of the NEMA 4X Enclosures feature top of the line seamless gaskets that are poured into place robotically.

You can easily remove the door by pulling out the pins of the concealed hinges. To ensure positive closing, these enclosures have a quarter turn locking mechanism. On the larger enclosures, there is a three point latch system instead of the locking mechanism. In addition, you do not need to drill your own internal mounting holes: they are provided.

Do They Come with an Inner Panel?

A 12 GA steel inner panel comes with each NEMA 4X Enclosure. The inner panel is mounts on M8 welded studs and is double bent for maximum rigidity. The exterior of the enclosure comes brushed smooth and unpainted. White heat fused polyester powder is electrostatically applied on a pretreaded base to finish the enclosures’ panels and interior. All of the enclosures are UL listed, IP66 rated, and CSA certified.

We also offer accessories to go with the NEMA 4X Enclosures. Mounting feet for the NEMA 4X single door wall mount enclosure is available for mounting horizontally or vertically. Multiple stainless steel padlock solutions are at your disposal, including a wing handle that accommodates a padlock. There is also a key lock that can be installed in the handle of your enclosure. The key lock comes with two keys.

Industrial Control Direct stands by all of the enclosures in the EXM Enclosures NEMA 4X series. We have tested out all of these products for quality and safety. We are certain they will be reliable and durable for your purposes.

EXM Enclosures NEMA 4X Pros:

  • CSA certified, IP66 rated, and UL listed
  • Protected from water coming from any direction, corrosion, oil, dust, splashing, and dirt
  • Positive closing ensured by quarter turn locking mechanism
  • Seamless gasket provides water tight seal
  • Finished with white heat fused polyester powder

Quick search results