EXM Enclosures nonmetallic NEMA 4X

Please select a sub-category below:

Is EXM Enclosures Non-Metal NEMA 4X Right for You?

Our EXM Enclosures Non-Metal NEMA 4X series of enclosures are designed and made by one of the best industrial enclosure manufacturers in the world. Intended for use indoors and outdoors, these non-metal enclosures are your perfect choice if you need to protect equipment in an area where corrosion is a problem. They are also constructed to provide protection against snow, windblown dust, hose directed water, splashing, and rain. Plus, you do not have to worry about ice formation on the outside of the enclosure causing any damage.

Our Non-Metal NEMA 4X Enclosures come in three different varieties with many different dimensions available in each variety. The three types are Hinged Cover Fiberglass, Quick Release Cover Fiberglass, and Screw Cover Fiberglass.

Why Should You Use NEMA 4X Fiberglass Enclosures?

To protect the equipment enclosed within the box from dirt, water, oil, or dust coming from any direction, all of the Non-Metal NEMA 4X Enclosures in this series are suited for outdoor and indoor use where corrosion could cause a problem. Our manufacturer exclusively produced and aesthetically designed these units using SMC polyester fiberglass composite.

For many industrial applications, fiberglass is the material of choice. Reinforced fiberglass can be used for a vast array of applications and in a wide range of environments thanks to its chemical, physical, and electrical properties.

To ensure a complete seal to protect the Non-Metal NEMA 4X Enclosures from the elements, a gasket is poured in place robotically. Stainless steel is used to make the quick release latches and the cover screws. Plus, the concealed hinges allow for 180 degree door opening and are removable. On the Hinged Cover Fiberglass enclosures, top, right, bottom, and left door opening is permitted thanks to the ability to place the hinges on any side of the enclosure.

What Are Some Additional Features?

For use at the sides of the box or on the top and bottom, mounting feet can be installed at 0 or 90 degree. All of the enclosures in this series come with an inner panel that is JIC standard 14 GA and white powder coated. The panels are also completely interchangeable. Anti-vibration screws are used to secure mounting feet and the inner panels.

Each of these enclosures is IP66 rated, CSA certified, and UL listed. For easy reference, you can get an idea of the dimensions of each unit by just looking at the model number. The first two digits after the letters represent an approximation of the height. The next two digits are the width. And, the final two are the depth. So, using model number 5412 ESFRH060404 as an example, this unit is about 6 inches high (actual: 6.5 inches) by 4 inches wide (4.5”) by 4 inches deep (4.125”).

EXM Enclosures Non-Metal NEMA 4X Pros:

  • Exclusively produced using SMC polyester fiberglass composite
  • Provides protection against snow, windblown dust, hose directed water, splashing, rain, and ice
  • Ideal for use in areas where corrosion is a problem
  • CSA certified, UL listed, IP66 rated
  • Tight gasket seal

 


Quick search results